Home > News > News
As a Concrete Steel Fiber Manufacturer, share with you.
How to put and mix steel fiber has become a problem that people have been confused about. In fact, it is very simple. Today, I will take you into the knowledge book of steel fiber.
High Tenacity Steel Fiber
The following points need to be noted. In order to ensure the quality of steel fiber silicon, after-sales service of Xi'an Macro water heater, various materials must be accurately measured, and all materials are calculated by weight. For steel fiber weighing tolerance is 2%o. The loading capacity of the steel fiber mixer truck should be controlled at 85% of the truck capacity. When feeding, it is advisable to put the aggregate and steel fiber into the mixer according to the construction ratio, and force the mixing for 2 to 3 minutes, so that the steel fiber and the aggregate are fully mixed, and then add water to mix for 3 to 5 minutes, and check whether the steel fiber is evenly mixed. If the steel fibers are stuck together, stirring should be continued until the steel fibers are completely dispersed into single fibers. It is better to use a horizontal biaxial forced mixer for mixing steel fiber silicon. When the fiber-silicon mixing tanker is transported to the construction site, it should be used after speeding up the rotation for 2 to 3 minutes, and check for clumping.
Our company also has High Tenacity Steel Fiber on sale, welcome to contact us.